Side Navigation

Reduce the cost of mold 5 big trick you know what?

    The cost of mold enterprises by manpower, materials, mold design and manufacturing procedures, suppliers and other factors, how to effectively reduce costs? Starting from the following aspects!
    1. Reasonable design of mold
    Many companies lack experienced mold designers or professional designers in different fields. The design of the unreasonable, for the enterprise, it is a disaster, will directly increase the cost of mold.
    2. Factory selection
    No factory resources, find the factory is difficult and time-consuming, whether to find a matching factory directly affect the cost of the mold. Choose a stable, reputable factory that is vital.
    3. Procurement of mold materials and accessories
    Mold costs, the material costs in the mold production costs accounted for about 25% to 30%, especially due to mold parts of the different types of materials, a large difference. Therefore, the mold material and accessories should be selected correctly. If the picture is only cheap hasty procurement, mold problems or short life, it is a pity.
    4. Quality and delivery control
    Mold cost control and quality and delivery is proportional to the relationship. If the mold quality to do a one-time bit, few changes, shorten the delivery, so that manufacturing costs are relatively lower. But this requires companies to send someone to track control, which in turn increased the cost of labor.
    5. To reduce capital disputes, after-sales problems
    If the processing of the mold if there are some bad behavior and non-standard operation, or because of technical and empirical reasons, will enable enterprises to increase the number of other costs, such as: residual, times, the emergence of waste, Rework, multiple tests caused by the additional costs of the trial costs, adverse products caused by the emergence of after-sales service fees. And because there is no strict trade norms and third-party fair and impartial ruling, prone to financial disputes, after-sales problems endless, unsatisfactory, so that costs continue to increase.