Mold in fact and our lives are closely related to our lives more than 90% of the items must be processed through the mold, and 95% of these items must be through the high temperature mold casting, the temperature should generally reach more than 300 ℃. Mold is industrial or civilian production for injection molding, blow molding, extrusion, die casting or forging molding, smelting, stamping, stretching and other methods to obtain the required products of various molds and tools.
As the shape of the mold is special, can not use the traditional insulation material to heat, make the mold heat loss at high temperatures, heat loss is serious, high temperature mold metal thermal fatigue loss and so on. Mold a lot of heat loss, not only directly increase production costs, but also due to frequent replacement of molds caused by a large number of production lines to stop production caused by greater economic losses.
Mold the use of high-temperature thermal insulation coating to solve the mold industry a lot of resources loss problems. China ZS-1 heat-resistant thermal insulation coating, thermal conductivity of 0.03W / mK, temperature 1800 ℃, can effectively inhibit the conduction of a variety of high-temperature insulation coating manufacturers, Beijing Zhisheng Weihua Chemical Co., Heat and radiant heat, thermal insulation suppression efficiency of up to 90%, separated by more than 80% of mold heat, resulting in a very good temperature inside the mold, the outer surface temperature will not be hot. Coating at 1100 ℃ mold surface coated with 8mm thick, the mold surface temperature can be reduced from 1100 ℃ to 100 ℃ or less. In addition Zhisheng Weihua mold high temperature insulation coating chlorine chloride content is zero, but also to prevent the air or process wet chloride, sulfide into the metal surface, play a good metal mold corrosion effect, it will not lead to Metal welding of the weld embrittlement, ZS-1 Zhisheng mold high temperature insulation coating insulation coefficient is very high, there is a good high temperature insulation effect.
Mold coating Zhisheng high temperature insulation coating, the heat loss energy consumption can reach more than 80%, die metal corrosion rate decreased by 60%, personnel safety increased by 100%, the enterprise benefits increased by more than 30%, industrial production safety factor doubled The
Mold is an important part of industrial production, mold insulation, improve the safety factor of industrial production, prevent personal accidents such as personal injury and property damage, eliminate or control dangerous, harmful factors, protect personal safety and health, equipment and facilities from Damage and other significant significance.